Month: May 2017 (page 2 of 9)

Raspberry Pi 3/Zero Alternative: Single Board Computer Mini PC | NanoPi NEO



Unboxing and Overview of the NanoPi NEO Single Board Computer, A Raspberry Pi 3 / Zero Alternative for DIY and Open Source Projects.

Get it Here: http://bit.ly/29t80me

source

Top Four awesome projects for the Raspberry Pi Zero W

1. Create a Raspberry Pi Zero AirPlay Speaker

While this project formerly demands using a Raspberry Pi Zero with a WiFi dongle accessory, the Zero W fully eliminates the requirement for this gadget. Put together with an affordable 5V light and portable battery, you can easily build yourself a amazing, wireless AirPlay speaker for streaming music from your Apple product.

Visit the complete step-by-step at Hackster. https://www.hackster.io/fvdbosch/raspberry-pi-zero-airplay-speaker-d99feb

2. Create a Raspberry Pi Zero W desk clock

Due to the Pi Zero W’s wireless functionality, you can build yourself a desktop clock that’s accurate to within two or three milliseconds. Once you have all the components (with a display that looks straight out of a Hollywood thriller), you may hook up the clock via WiFi to the Network Time Protocol (NTP) and go to sleep well learning you are in sync with the remainder of the universe.

Check out the complete step-by-step guidelines on Hackaday. https://hackaday.io/post/54276

3. Create your own Raspberry Pi-powered R2-D2

For those who have always wanted to hack a toy R2-D2 into something a tad bit more realistic, the Raspberry Pi Zero W is here now to collaborate. Les Pounder at TechRadar has posted a article for adding some wheels and attitude to the precious droid from the “Star Wars” world.

See the step-by-step guidelines listed here. http://www.techradar.com/how-to/computing/how-to-build-your-own-r2-d2-with-the-raspberry-pi-zero-1310979

4. A Pi Zero W wireless security camera

Among the list of great noticeable advantages to having a Raspberry Pi Zero W is being able to remain connected to the online world in places lacking ethernet connection. For wireless security camera systems, this new improvement is pretty beneficial.

From Raspberry Pi Spy, finely detailed guidelines have already been posted to creating your own personal Pi Zero W wireless security camera. Even better, there currently exists both an easy way to mount your camera and a professional OS named motionEyeOS to tie it as a whole.

See the complete step-by-step here. http://www.raspberrypi-spy.co.uk/2017/04/raspberry-pi-zero-w-cctv-camera-with-motioneyeos

PACE Rework and Repair “Conformal Coating Removal”



PACE Rework and Repair For Electronics Lesson 5
Visit us at:

http://www.paceworldwide.com
http://www.paceworldwide.com/reps.html

Follow us on Facebook and Twitter:

Facebook: http://www.facebook.com/paceworldwide
Twitter: https://twitter.com/#!/PACE_Worldwide

source

Raspberry PI Zero NES Classic Killer!!



This is just a fast description of the Raspberry Pi Zero retro machine I have built. If you would like more details on what I used, where I picked up the parts…etc You can send me a message!

This is my first real video upload. Teh quality isn’t the best but not the worst. I promise higher quality content as the days/weeks/months go by.

I’ll be posting gaming footage, rants, 3D printing, reviews and more. I’m looking to network with other youtubers. Please message me!! Let’s talk!

source

One-upping the NES Classic Edition with the Raspberry Pi 3 and RetroPie

NES Classic is no more, but thankfully low-budget hobbyist boards are an excellent option for simple projects.

Last Nov, Nintendo amazed everyone by returning to its beginnings and releasing the NES Classic. The fabulous emulator/nostalgia-fest sparked unanticipated need, including near-instant supply issues and 200-percent-plus markups in secondary markets. So in December of 2016, we chose to build our own version as a substitute. Since Nintendo bizarrely announced that it won’t be making any more of the hard-to-find mini consoles this week, we’re re-running this piece to help those with a DIY streak once again build your own. Hardware recommendations have been updated to reflect current availability and pricing for April 2017.

Continue reading https://arstechnica.com/gaming/2017/04/one-upping-the-nes-classic-edition-with-the-raspberry-pi-3-and-retropie/

Meet MintyPi 2.0: Raspberry Pi Video Gaming Emulator Crammed Into Tiny Mint Tin Box

A YouTuber and innovator has shown mintyPi 2.0, a project that changes a regular mint tin box into a portable game console.

MintyPi 2.0, powered by the Raspberry Pi tiny computer, is the second attempt at the project, bringing with it a multitude of improvements as compared to the original mintyPi.

Continue reading http://www.techtimes.com/articles/204662/20170411/meet-mintypi-2-0-raspberry-pi-video-game-emulator-packed-into-tiny-mint-tin-box.htm

JB Hi-Fi Just Received The Mother Lode Of Nintendo Classic Minis

Christmas 2016 will forever be recalled as the year people went legit bananas for a old style NES console. The thing was a piece of plastic that basically played 30 games from the 8-bit era – but admire is a highly effective thing. So powerful that demand fully eclipsed supply, contributing to failed websites, exhausted stock and many empty-handed customers.

For people still on a Zelda-like pursuit to purchase this mythological device, we have some very good news: the Nintendo NES Classic Edition is currently for sale in JB Hi-FI stores, Across australia. Hurrah!

Continue reading at https://www.lifehacker.com.au/2017/04/jb-hi-fi-just-received-a-butt-load-of-nintendo-mini-nes-consoles/

GENERAL EPOXY RESIN POTTING AND ELECTRONIC ENCASULATION



MAX MCR A/B EPOXY POTTING AND ENCAPSULATION OF ELECTRONIC CIRCUITRY AND PRINTED CIRCUITRY FOR ENVIRONMENTAL HERMETIC SEALING
http://www.ebay.com/itm/311412419001

source

LattePanda Troubleshooting, Setup and Benchmark (Novobench) – Windows 10 Single Board Computer



Today I try to setup the LattePanda, a Windows 10 capable single board computer. We are looking at the Enhanced Kit + Touch Panel. Unfortunately my board didnt work right out of the box which lead to a lot of troubleshooting and ultimately success. I also run a Benchmark (Novobench) on the LattePanda. This enhanced version of the board is upgraded from 2GB to 4GB RAM and 64GB ROM from 32GB. The LattePanda also features a quad-core 1.8Ghz processor, WIFI, Bluetooth 4.0, HDMI port, Micro SD card slot, Lan/Ethernet port and a USB 3.0 port, plus an onboard Arduino processor!

Unboxing video: https://www.youtube.com/watch?v=2XuDiY5y77M

Watch this video to properly format and partition a USB to reinstall Windows: https://www.youtube.com/watch?v=y5tkOctUFM8

Buy your own (Affiliate Links):
LattePanda 4G/64GB without Win10 product key: http://amzn.to/2cyEuhy

LattePanda 2G/32GB – a Win10 Single Board Computer (with Win10 product key): http://amzn.to/2bW4F36

LattePanda 2G/32GB – a Win10 Single Board Computer (without Win10 product key): http://amzn.to/2c5fihP

7-inch 1024×600 IPS Display for LattePanda: http://amzn.to/2cyDWZi

7-inch Capacitive Touch Panel Overlay for LattePanda Display: http://amzn.to/2c1X81w

Plywood Case for LattePanda: http://amzn.to/2bW5jOl

The project was funded through the crowdfunding website, Kickstarter (https://www.kickstarter.com/projects/139108638/lattepanda-a-45-win10-computer-for-everything) and raised £442,735 from 4,060 backers.

Feel free to ask me any questions about the LattePanda – a Raspberry Pi alternative.

Please like, comment, share and subscribe.

You can find us at:
Website: www.CrispyVideos.com
Twitter: www.twitter.com/CrispyVideos
Facebook: https://www.facebook.com/CrispyVideos
Google +: plus.google.com/+CrispyVideosOfficial

source

Top 4 amazing projects for the Raspberry Pi Zero W

1. Make a Raspberry Pi Zero AirPlay Speaker

While this project at first calls for using a Raspberry Pi Zero with a WiFi dongle accessory, the Zero W effortlessly eliminates the need for this item. Combined with an inexpensive 5V hand held battery, it’s easy to build yourself a incredible, wireless AirPlay speaker for streaming music from your Apple device.

Look into the full step-by-step from Hackster. https://www.hackster.io/fvdbosch/raspberry-pi-zero-airplay-speaker-d99feb

2. Make a Raspberry Pi Zero W desk clock

As a result of Pi Zero W’s wireless abilities, it’s easy to build yourself a desktop clock that’s accurate to within a couple milliseconds. Once you have all the parts (with a display that looks straight out of a Hollywood thriller), you could hook up the clock via WiFi to the Network Time Protocol (NTP) and fall asleep nicely learning you are in sync with the remainder of the universe.

View the full step-by-step instruction manual on Hackaday. https://hackaday.io/post/54276

3. Make your personal Raspberry Pi-powered R2-D2

For those who have always wanted to hack a toy R2-D2 into something a bit more reasonable, the Raspberry Pi Zero W is here to help. Les Pounder from TechRadar has shared a guide for adding some wheels and attitude to the popular android from the “Star Wars” world.

See the step-by-step guidelines listed here. http://www.techradar.com/how-to/computing/how-to-build-your-own-r2-d2-with-the-raspberry-pi-zero-1310979

4. A Pi Zero W security camera

One of the several considerable distinct benefits to using a Raspberry Pi Zero W is its capability to remain connected to the online world in places with no ethernet connection. For security camera systems, this new supplement is quite valuable.

Over at Raspberry Pi Spy, finely detailed instruction manual have already been shared to making your very own Pi Zero W security camera. Better yet, there presently exists both a good way to mount your camera and a dependable OS known as motionEyeOS to tie it as a whole.

See the full step-by-step here. http://www.raspberrypi-spy.co.uk/2017/04/raspberry-pi-zero-w-cctv-camera-with-motioneyeos

PCB solder pad repair & corrosion clean up – The epoxy method



This is a demonstration of a PCB repair which involves repairing damaged surface mount solder pads as well as cleaning up corrosion from a leaking electrolytic capacitor. The pads had been damaged by the owner of the motherboard as a result of him trying to repair the board on his own.

I hope that this video will give you some ideas on how to perform a proper pad repair using the epoxy method.
During this repair, I used an epoxy that is heat resistant up to 315°C for 60 seconds.
If you ever find any kind of epoxy on the market that is specified to be heat resistant up to more than 315°C, then I would be happy if you could let us know about it in the comment section as it does appear that high temperature epoxies are quite difficult to find.

The following products was used in this video:
CircuitWorks CW2500 – Two component epoxy overcoat
CircuitWorks CW3300 – Overcoat Pen

I have made several videos before where I have had to fix up other people’s mistakes that they have made during their repair attempts, and this repair only adds on to the list.
If you are not a repair technician and your motherboard has stopped working, it would be in the best of your own interest not to attempt a repair that you really cannot handle. Because there is a huge risk that you will actually end up doing more harm than good. We are of course mostly talking about board damage in the case of motherboards, but it gets considerably worse when dealing with things like power supplies, which can easily become a great shock hazard to inexperienced technicians and even result in electrocution.

As always, comments and questions regarding this repair are always welcome.

source

Fabriquer une console retrogaming avec le Raspberry Pi



Envie de créer votre console de retroraming en 10 minutes ? Suivez le tuto de Nico !
ACHETER LE RASPBERRY PI ► http://amzn.to/2fNALid

Nintendo Classic Mini : le test ►

NINTENDO CLASSIC MINI
http://amzn.to/2eZ5TtK

MANETTE SUPPLEMENTAIRE NINTENDO CLASSIC MINI
http://amzn.to/2fiIBBO

T-SHIRT TOSTADORA AVEC 20% DE REDUC ► http://www.thegrandtest.com/le-t-shirt-du-jour-3/

NOS VIDEOS DE TEST HIGH-TECH :

Blue Raspberry ► https://www.youtube.com/watch?v=zmFaYgW5SEA

Adibla Neckmaster ► https://www.youtube.com/watch?v=HbOg7pezzxE

Sonos Play:5 : l’enceinte connectée de qualité haute fidélité ► https://www.youtube.com/watch?v=W07G4IUSFe0

Bose QC 35 ► https://www.youtube.com/watch?v=5jcaSSXX0fw

Kobo Aura One ►

Le TOP 10 des trucs les plus cool de l’IFA 2016 ►

Panasonic Lumix GX80 ► https://www.youtube.com/watch?v=3NXo7y19Ckw

Le TOP 5 des casques à réduction active de bruit ► http://www.thegrandtest.com/top-5-des-meilleurs-casques-a-reduction-active-de-bruit/

Olympus VP10 : article et photos ► http://www.thegrandtest.com/olympus-vp10-enregistreur-audio-de-poche/

Lenovo MOTO G4 PLUS vs. G4 : le jeu des 4 différences ► http://www.thegrandtest.com/lenovo-moto-g4-vs-g4-plus-jeu-4-differences/

Abonne-toi à notre chaîne YouTube ► http://bit.ly/GRabonn

Suis-nous sur Twitter ► https://twitter.com/TheGrandTest

Notre page Facebook ► https://www.facebook.com/thegrandtest

source

One-upping the NES Classic Edition with the Raspberry Pi 3 and RetroPie

NES Classic is no more, but luckily bargain hobbyist boards are perfect for simple projects.

Last Nov, Nintendo shocked everyone by returning to its origins and releasing the NES Classic. The delightful emulator/nostalgia-fest triggered sudden need, including near-instant supply issues and 200-percent-plus markups in secondary markets. So in December of 2016, we chose to build our own version instead. Since Nintendo bizarrely announced that it won’t be making any more of the hard-to-find mini consoles recently, we’re re-running this piece to help those people with a DIY streak again build your own. Hardware recommendations have been updated to reflect current availability and pricing for April 2017.

Continue reading https://arstechnica.com/gaming/2017/04/one-upping-the-nes-classic-edition-with-the-raspberry-pi-3-and-retropie/

Meet MintyPi 2.0: Raspberry Pi Game Emulator Jampacked Into Tiny Mint Tin Box

A YouTuber and inventor has disclosed mintyPi 2.0, a project that turns a typical mint tin box into a mobile gaming console.

MintyPi 2.0, powered by the Raspberry Pi tiny computer, is the 2nd attempt at the project, bringing with it a few revisions in comparison to the original mintyPi.

Continue reading http://www.techtimes.com/articles/204662/20170411/meet-mintypi-2-0-raspberry-pi-video-game-emulator-packed-into-tiny-mint-tin-box.htm

JB Hi-Fi Just Received The Mother Lode Of Nintendo Classic Minis

Christmas 2016 will always be kept in mind as the year people went legit bananas for a old style NES console. The thing was a piece of plastic that basically played 30 games from the 8-bit era – but nostalgia is a highly effective thing. So powerful that demand entirely eclipsed supply, triggering crashed websites, exhausted stock and a huge number of empty-handed customers.

For those still on a Zelda-like quest to purchase this mythical gadget, we’ve got some very good news: the Nintendo NES Classic Edition is now available in JB Hi-FI stores, All over australia. Hurrah!

Continue reading at https://www.lifehacker.com.au/2017/04/jb-hi-fi-just-received-a-butt-load-of-nintendo-mini-nes-consoles/

Thoughts on Removing Potting Compound from Electronics



Many electronic assemblies, especially those in automotive and marine industries use potting compound which act as a protective coating. This video looks at non-re workable compounds which are especially difficult to remove…. a property of many (all?) epoxies is the glass transition temperature which can be exploited. Also looks at the need for a fume hood and respirators with organic vapor cartridges!

source

BGA epoxy glue removing



Most of glues used for securing BGA chips in place have properties similar to regular plastics and can be removed with soldering iron and some rosin…. ok – lot of rosin to be precise ;-D

source

Very smart Z80 based single board computer with keyboard/video interface



Before I made a single board Z80 based computer but this time I made much smarter one! It is based on composite-Z80, contains SIO, PIO, CTC, CGC and basically we don’t need any extra chip for completion. This board has 32kB Memory and tinyBASIC is stored in 16kB EP-ROM. As same as my another project, Now it’s on sale at https://www.tindie.com/products/microwavemont/z80-single-board-computer-version-20/

source

Top 4 cool projects for the Raspberry Pi Zero W

1. Build a Raspberry Pi Zero AirPlay Speaker

While this project in the beginning requires using a Raspberry Pi Zero with a WiFi dongle attachment, the Zero W effortlessly does away with the demand for this gadget. Along with a cheap 5V light and portable battery, you can actually build yourself a awesome, wireless AirPlay speaker for streaming music from your Apple product.

Investigate the entire step-by-step from Hackster. https://www.hackster.io/fvdbosch/raspberry-pi-zero-airplay-speaker-d99feb

2. Build a Raspberry Pi Zero W desk clock

Thanks to the Pi Zero W’s wireless features, it’s easy to build yourself a desktop clock that’s accurate to within some milliseconds. Once you have all the components (with a display that looks straight out of a Hollywood thriller), you can actually hook up the clock via WiFi to the Network Time Protocol (NTP) and go to sleep well knowing you are in sync with the remainder of the universe.

Check out the entire step-by-step instructions on Hackaday. https://hackaday.io/post/54276

3. Build your own Raspberry Pi-powered R2-D2

For those who have always wanted to hack a toy R2-D2 into something a bit more sensible, the Raspberry Pi Zero W can be employed to oblige. Les Pounder from TechRadar has published a article for adding some wheels and attitude to the popular android from the “Star Wars” universe.

Look into the step-by-step instruction manual here. http://www.techradar.com/how-to/computing/how-to-build-your-own-r2-d2-with-the-raspberry-pi-zero-1310979

4. A Pi Zero W security camera

One of the several significant obvious advantages to getting a Raspberry Pi Zero W is its capability to remain connected to the internet in places with no ethernet connection. For security camera products, this new supplement is amazingly valuable.

At Raspberry Pi Spy, complete instruction manual have already been published to building up your very own Pi Zero W security camera. Better yet, there already exists both a simple way to mount your camera and a committed operating system known as motionEyeOS to tie it altogether.

Look into the entire step-by-step here. http://www.raspberrypi-spy.co.uk/2017/04/raspberry-pi-zero-w-cctv-camera-with-motioneyeos

Older posts Newer posts

© 2019 PCB China

Up ↑